|
|
|
|
| Manufacturer: | UWE |
| Model(s): | CCS |
| Date updated: | 17.02.00 |
1. Switch off.
2. Press and hold [MODE] key. Press [ON/ZERO] key.
3. The display will show [CAL ?].
4. Wait a few seconds. The display will then show [LoAd] followed by [XXXX] and [YYYY] which are the weights required for calibration.
5. Place one or other of the weights on the hook and if accepted the display will show [donE].
6. Calibration is complete.