|
|
|
|
| Manufacturer: | UWE |
| Model(s): | BW-150 |
| Date updated: | 14.02.00 |
1. Switch off.
2. Press and hold <-> key. Press [ON] key (I).
3. Display shows [CAL?]
4. Press <-> key. The display shows [YE5], then [LoAd] followed by [XXXX] or [YYYY]. These are the values of the calibration weights to be used.
5. Place relevant calibration weight on plate.
6. Press <-> key again.
7. After a pause the display will show [donE] and return to weighing mode.