|
|
|
|
| Manufacturer: | UWE |
| Model(s): | 1707 Indicator |
| Date updated: | 17.02.00 |
1. Switch off.
2. Press & hold [SET] key. Press [ON/ZERO] key.
3. Display will show [CAL-0 kg] to show scale zero is being calibrated.
4. After a pause the display will show [00000 kg] with one "0" flashing. Set the span calibration weight by using the[MODE] key to move the flashing "0" from left to right. Use the [TARE] key to increase the figure and the [ON/ZERO] key to decrease the figure.
5. Place the chosen calibration weight on the platform.
6. After a pause the display will show [donE] and calibration is complete