|
|
|
|
| Manufacturer: | Shinko |
| Model(s): | DJH-E |
| Date updated: | 18.02.00 |
1. Press [S] key to start automatic calibration. Display shows [S.A.CAL.].
2. Display starts blinking [CAL 0] which indicates zero adjustment is being automatically performed.
3. Display changes to [CAL. On] which shows the procedure is ready for span adjustment.
4. Turn the Calibration Knob gently to CAL (anticlockwise) until it stops. The internal calibration weight is now being applied. The display starts blinking to indicate the span adjustment is automatically being performed.
5. The display changes to [CAL oFF] to indicate that calibration has been completed.